js毕业论文外文文献(求一篇外文文献)

1.求一篇外文文献

Plasma assisted thermal bonding for PMMA microfluidic chips with integrated metal microelectrodes

Liu, JS; Qiao, HC; Liu, C; Xu, Z; Li, YQ; Wang, LD

Liu, JS, Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116023, Liaoning, Peoples R China

分享到:0

Abstract

Fracture of integrated metal microelectrodes likely happens during the thermal bonding process of PMMA [poly (methylmethacrylate)] microfluidic chips. In this paper, the fracture behaviors are studied. The fracture is mainly caused by the plastic deformation of the electrode plate (the PMMA plate with microelectrodes) and the thermal stress of microelectrodes, which is due to the high bonding temperature. To decrease the bonding temperature, a plasma assisted thermal bonding method is evaluated and first used to eliminate the fracture of microelectrodes. in this process. the surface of the cover plate (the PMMA plate with microchannels) is modified using oxygen plasma before the electrode plate is thermally bonded to the cover plate. The parameters of the oxygen plasma treatment are optimized, and the contact angle is decreased from 71.7 degrees to 43.6 degrees. The thermal bonding temperature is optimized, which decreases the temperature from 100 degrees C to 85 degrees C. Testing of bonding strength shows an average failure pressure of 1.75 MPa, which is comparable to the bonding strength of 1.46 MPa for chips bonded at 100 degrees C without plasma modification. In order to demonstrate this bonding method, a PMMA microfluidic chip with integrated copper interdigitated microelectrode arrays for AC electroosmotic pump is fabricated. (C) 2009 Elsevier B.V. All rights reserved.

关键词: Microfluidic Microelectrocle Thermal bonding Plasma PMMA

毕业论文外文文献翻译,毕业论文外文文献要求,毕业论文外文文献去哪找

2.毕业论文外文文献!!!!

Articles on Tax Resistance, Including: Whiskey Rebellion, Free Trade Zone, Starve the Beast, Tax Avoidance and Tax Evasion, Institute for Fiscal Studi

Articles on International Business, Including: Free Trade, Bilderberg Group, Special Economic Zone, Multinational Corporation, Netherlands Institute

Free Trade Zone Factory Supervisors

Economy of Panama: Puebla-Panama Plan, International Rankings of Panama, Colon Free Trade Zone, Panamanian Balboa

Articles on Special Economic Zones, Including: Special Economic Zone, Free Trade Zone, Xiamen Special Economic Zone, Pudong, Xiangshan County, Guangdo

外文,毕业论文,文献,js

3.毕业论文的外文文献及翻译怎么弄

参考文献是在学术研究过程中,对某一著作或论文的整体的参考或借鉴.征引过的文献在注释中已注明,不再出现于文后参考文献中. 外文参考文献就是指论文是引用的文献原文是国外的,并非中国的。

原文就是指原作品,原件。即作者所写作品所用的语言。

如莎士比亚的《罗密欧与朱丽叶》原文是英语。 译文就是翻译过来的文字,如在中国也可以找到莎士比亚《罗密欧与朱丽叶》的中文版本。

这个中文版本就称为译文 回答者: xffjy - 见习魔法师 三级 10-22 11:52。

4.谁能帮我查找一些高吸油性树脂的外文文献

1、Synthesis and characterization of a novel high-oil-absorbing resin 作者:Xiao-Ming Zhou;Cheng-Zhi Chuai 刊名:Journal of Applied Polymer Science 出版日期:2010 期号:No.6 卷号:Vol.115 摘要:A high-oil-absorbing resin, which was a low crosslinking resin, was synthesized by conventional suspension copolymerization in this study. The effects of the monomer ratio, crosslinker, initiator, ratio of water to oil, and defined optimum reaction conditions were studied. The highest oil absorptivity of the resin was about 11.5 g/g in diesel and the oil-absorption saturation time was 3 days when。

【数据库商】 Wiley InterScience 【关键词】resins;rubber 2Synthesis and properties of oil absorption resins filled with polybutadiene 作者:Shan GR.;Xu PY.;Weng ZX.;Huang ZM. 刊名:Journal of Applied Polymer Science 出版日期:2003 期号:NO.12 卷号:Vol.89 摘要:Polybutadiene (PB) is used to fill an oil absorption resin as a physical crosslinker to construct a kind of 3-dimensional network with a high degree crosslinking and low crosslink density. A series of acrylic resin particles with various compositions%are prepared by suspension polymerization, using benzoyl peroxide (BPO) as an initiator and ethylene glycol dimethacrylate (EGDMA) as a chemical【数据库商】 Wiley InterScience 【关键词】Resins;Crosslinking;Alkyl acrylate copolymers;Swelling behavior;Gel particles;Absorbency 3Structured polyurethanes for oil uptake 作者:Yang, JS;Cho, SM;Kim, BK;Narkis, M 刊名:Journal of Applied Polymer Science 出版日期:2005 期号:NO.5 卷号:Vol.98 摘要:In an attempt to develop a desirable resin formulation for spilled oil absorption, segmented polyurethanes of various types and lengths of hard and soft segments have been synthesized and tested for X-ray diffraction, thermal, mechanical, and dynamic mechanical properties in addition to oil and water absorptions. Significant oil absorption was obtained with ether type polyol of high molecular【数据库商】 Wiley InterScience 【关键词】polyurethanes;oil absorption;structure-property;relations;XPS 4Oil-absorption function of physical crosslinking in the high-oil-absorption resins 作者:Shan GR.;Xu PY.;Weng ZX.;Huang ZM. 刊名:Journal of Applied Polymer Science 出版日期:2003 期号:NO.14 卷号:Vol.90 【数据库商】 Wiley InterScience 【关键词】Resins;Crosslinking;Alkyl acrylate copolymers;Swelling behavior;Gel particles;Absorbency 很多的,你自己在找找。我们数据库现在比较忙,所以下载不了。

5.论文中的外国文献

提供几篇有关于上市公司收益质量分析的论文的外文文献,供写作参考。

[1] Benaritzi, Shlomo, Roni Michaely, and Richard Thaler. Do changes in Dividends Signal the Future or the Past? .The Journal of Finance, 1997, (7) .

[2] DcAngelo. L. Accounting numbers as market valuation substitutes: A study of management buyouts of public stockholders .The Accounting Review, 1986,61, (61) :400-420 .

[3] Jones J. Eamings management during import relief investigations .Journal of Accounting Research, 1991,29, (29) :193-228 .

js毕业论文外文文献

转载请注明出处众文网 » js毕业论文外文文献(求一篇外文文献)

资讯

毕业论文本科选题(本科毕业论文该如何选题)

阅读(57)

本文主要为您介绍毕业论文本科选题,内容包括本科毕业论文该如何选题,毕业论文选题方向,本科毕业论文该如何选题。《毕业论文的选题方法》选题的大小一定要适中,难易要适度.(选题的方法。注意两点:一是选题的大小一定要适中,难易要适度。我们从

资讯

表演系毕业论文题目审批表(毕业设计(论文)课题申报表怎么写)

阅读(55)

本文主要为您介绍表演系毕业论文题目审批表,内容包括毕业论文审批表中题目完成形式那栏填什么,毕业设计(论文)课题申报表怎么写,什么叫论文课题审批表?。去百度文库,查看完整内容>内容来自用户:教育资料库如何填写“毕业设计(论文)课题申报表”

资讯

毕业论文一定要有致谢词吗(毕业论文的最后要写致谢词吗)

阅读(49)

本文主要为您介绍毕业论文一定要有致谢词吗,内容包括毕业论文要不要写致谢词?,毕业论文的最后要写致谢词吗,毕业论文的正文后面需不需要写“致谢辞”。毕业论文的最后要写致谢词.论文格式:1.题目:题目应简洁、明确、有概括性,字数不宜超过20个

资讯

设计类毕业论文大纲参考模板(毕业论文大纲格式)

阅读(74)

本文主要为您介绍设计类毕业论文大纲参考模板,内容包括毕业论文大纲格式,毕业论文大纲的格式论文大纲怎么写,论文大纲格式。论文题目:要求准确、简练、醒目、新颖。2、目录:目录是论文中主要段落的简表。(短篇论文不必列目录)3、提要:是文章主要

资讯

毕业论文摘要字数一般不宜超过(论文摘要需要多少字?)

阅读(61)

本文主要为您介绍毕业论文摘要字数一般不宜超过,内容包括论文摘要需要多少字?,大学毕业论文字数最多不能超过多少,现代期刊发表的论文的摘要字数最长不超过多少字。摘要是论文的精华,大概100~300字左右。摘要的概念论文摘要是对论文的内容不

资讯

本科毕业论文改sci难吗(SCI论文很难吗)

阅读(56)

本文主要为您介绍本科毕业论文改sci难吗,内容包括大学本科论文本科生发表SCI论文难不难,本科生在SCI上发表论文难不难,本科毕业论文可以发表到sci么?具体有什么要求?感激不尽!搜狗问。没有想象中的那么难。在还没有发英文的文章前,总觉得写

资讯

自考本科毕业论文得良难吗(自考毕业论文好过吗)

阅读(46)

本文主要为您介绍自考本科毕业论文得良难吗,内容包括自考本科论文好过吗?,自考毕业论文好过吗,大学自考毕业论文难吗?会查重吗。据学术堂了解自考毕业论文主要分为论文写作和论文答辩两个部分,下面就给大家分享一些小技巧。自考毕业论文写作

资讯

毕业论文师范学院问卷(如何用问卷调查法写毕业论文?)

阅读(79)

本文主要为您介绍毕业论文师范学院问卷,内容包括本人师范生一枚,学术论文需要数据收集,麻烦帮忙填写一下我在问卷,本科生毕业论文中的数据有些是问卷调查里的有些是自己编的而且计,如何用问卷调查法写毕业论文?。单从你的这个题目来看,首先

资讯

毕业论文找谁写靠谱(哪里写论文比较靠谱?)

阅读(51)

本文主要为您介绍毕业论文找谁写靠谱,内容包括哪里写论文比较靠谱?,请问代写论文哪好?,想找个可靠点的,写毕业论文比较优秀的论文公司,请问哪个比较可靠。实践证明,走全员化管理道路是工业企业会计电算化工作的最有效途径。不管企业的经济效

资讯

万科毕业论文选题理由(毕业论文选择万科股权之争的理由)

阅读(47)

本文主要为您介绍万科毕业论文选题理由,内容包括毕业论文选择万科股权之争的理由,毕业论文选择万科股权之争的理由,论文选题理由应该怎么写。万科在深圳召开第十七届董事会第十一次会议,审议万科拟发行股份购买深圳地铁资产的预案。晚间,有关

资讯

毕业论文本科选题(本科毕业论文该如何选题)

阅读(57)

本文主要为您介绍毕业论文本科选题,内容包括本科毕业论文该如何选题,毕业论文选题方向,本科毕业论文该如何选题。《毕业论文的选题方法》选题的大小一定要适中,难易要适度.(选题的方法。注意两点:一是选题的大小一定要适中,难易要适度。我们从

资讯

表演系毕业论文题目审批表(毕业设计(论文)课题申报表怎么写)

阅读(55)

本文主要为您介绍表演系毕业论文题目审批表,内容包括毕业论文审批表中题目完成形式那栏填什么,毕业设计(论文)课题申报表怎么写,什么叫论文课题审批表?。去百度文库,查看完整内容>内容来自用户:教育资料库如何填写“毕业设计(论文)课题申报表”

资讯

毕业论文一定要有致谢词吗(毕业论文的最后要写致谢词吗)

阅读(49)

本文主要为您介绍毕业论文一定要有致谢词吗,内容包括毕业论文要不要写致谢词?,毕业论文的最后要写致谢词吗,毕业论文的正文后面需不需要写“致谢辞”。毕业论文的最后要写致谢词.论文格式:1.题目:题目应简洁、明确、有概括性,字数不宜超过20个

资讯

设计类毕业论文大纲参考模板(毕业论文大纲格式)

阅读(74)

本文主要为您介绍设计类毕业论文大纲参考模板,内容包括毕业论文大纲格式,毕业论文大纲的格式论文大纲怎么写,论文大纲格式。论文题目:要求准确、简练、醒目、新颖。2、目录:目录是论文中主要段落的简表。(短篇论文不必列目录)3、提要:是文章主要

资讯

毕业论文摘要字数一般不宜超过(论文摘要需要多少字?)

阅读(61)

本文主要为您介绍毕业论文摘要字数一般不宜超过,内容包括论文摘要需要多少字?,大学毕业论文字数最多不能超过多少,现代期刊发表的论文的摘要字数最长不超过多少字。摘要是论文的精华,大概100~300字左右。摘要的概念论文摘要是对论文的内容不

资讯

毕业设计与毕业论文有什么不同(毕业设计和毕业论文的区别)

阅读(49)

本文主要为您介绍毕业设计与毕业论文有什么不同,内容包括毕业设计和毕业论文的区别,毕业设计和毕业论文有什么区别?,毕业设计跟毕业论文有什么区别?。毕业设计和毕业论文的区别如下:指代不同毕业设计:是指工、农、林科高等学校和中等专业学校