毕业设计论文外文翻译

1.毕业论文外文翻译是什么意思

毕业论文外文翻译：将外文参考文献翻译成中文版本。

翻译要求：

1、选定外文文献后先给指导老师看，得到老师的确认通过后方可翻译。

2、选择外文翻译时一定选择外国作者写的文章，可从学校中知网或者外文数据库下载。

3、外文翻译字数要求3000字以上，从外文文章起始处开始翻译，不允许从文章中间部分开始翻译，翻译必须结束于文章的一个大段落。

参考文献是在学术研究过程中，对某一著作或论文的整体的参考或借鉴.征引过的文献在注释中已注明，不再出现于文后参考文献中。外文参考文献就是指论文是引用的文献原文是国外的，并非中国的。

原文就是指原作品，原件，即作者所写作品所用的语言。如莎士比亚的《罗密欧与朱丽叶》原文是英语。译文就是翻译过来的文字，如在中国也可以找到莎士比亚《罗密欧与朱丽叶》的中文版本，这个中文版本就称为译文。

扩展资料：

外文翻译需要注意的问题

1、外文文献的出处不要翻译成中文，且写在中文译文的右上角（不是放在页眉处）；会议要求：名称、地点、年份、卷（期），等。

2、作者姓名以及作者的工作单位也不用必须翻译。

3、abstract翻译成“摘要”，不要翻译成“文章摘要”等其他词语。

4、Key words翻译成“关键词” 。

5、introduction 翻译成“引言”（不是导言）。

6、各节的标号I、II等可以直接使用，不要再翻译成“第一部分”“第二部分”，等。

7、注意排版格式，都是单排版，行距1.25，字号小4号，等（按照格式要求）。

8、里面的图可以拷贝粘贴，但要将图标、横纵指标的英文标注翻译成中文。

9、里面的公式、表不可以拷贝粘贴，要自己重新录入、重新画表格。

2.毕业论文的外文翻译要写什么内容

《关于毕业论文书写格式》关于毕业论文书写格式（参考某一学校的要求）论文书写格式论文全部要采用word 来书写，文件名统一为“report95´ ´ .doc”，其中´ ´ 代表自己的学号。

学位论文一般应包括下述几部分：论文首页格式：其中学位论文题目用黑体二号字，其余用宋体四号字论文题目应能概括整个论文最重要的内容，简明、恰当，一般不超过25个字。中文摘要及其关键词（宋体5号字b5排版）： 4 论文第二页为500字左右的中文内容摘要，应说明本论文的目的、研究方法、成果和结论。

学位论文摘要是学位论文的缩影，尽可能保留原论文的基本信息，突出论文的创造性成果和新见解。论文摘要应尽量深入浅出，通俗易懂，少用公式字母，语言力求精炼、准确。

4 在本页的最下方另起一行，注明本文的关键词3╠5个。英文摘要及其关键词（宋体5号字b5排版）：论文第三页为英文摘要，内容与中文摘要和关键词相同。

学校名称：东北师范大学院（系）名称：计算机系本科生学号：学位论文题目学科、专业：计算机科学技术本科生姓名： _____ _ 指导教师姓名：_________ 指导教师职称：___________ 东北师范大学计算机系学位评定委员会年月摘要（粗宋体居中四号字）（空一行）摘要内容（宋体5号左对齐）（空一行）关键词：词1、词2 目录：论文各章节的详细目录。格式如下：计算机概论……… ………………………………..……1 1.1 计算机产生……..…………………………………………..1 1.2 计算机的发展……………………………………………..2 1.3 计算机中的进制 …………………………………………3 一二进制表示法…………………………………………..….3 第二章计算机文化基础……………………………………….6 其中：“章”部分使用宋粗体四号字；“节”部分采用宋体5号字引言（或序言）（宋体5号字b5排版）：内容为本研究领域的国内外现状，本论文所要解决的问题，该研究工作在经济建设、科技进步和社会发展等某方面的实用价值与理论意义。

正文是学位论文的主体： 4 要求采用宋体5号字b5排版。每页36行，每行32个字。

页码打印在页面下方中间位置，论文装订后尺寸为标准b5复印纸的尺寸。页眉部分奇数页使用“东北师范大学计算机系学士学位论文”，偶数页使用论文题目的名称。

4 论文中图表、附注、参考文献、公式一律采用阿拉伯数字连续（或分章）编号。图序及图名置于图的下方；表序及表名置于表的上方；论文中的公式编号，用括弧括起写在右边行末，其间不加虚线。

4 学位论文一律在左侧装订，要求装订、剪切整齐，便于使用。 4 论文字数控制在1万字至3万字之间。

宋体3号字居中显示（空一行） §1.1 宋体4号字居中显示（空一行）粗宋体5号字左起正文部分宋体5号字，语言要简练，不能有错字、别字。也不能有错误的观点。

参考文献：按学位论文中所引用文献的顺序、列于文末。 [编号]、作者、文章题目、期刊名（外文可缩写）、年份、卷号、期数、页码。

文献是图书时，书写格式为： [编号]、作者、书名、出版单位、年份、版次、页码。附录：包括放在正文内过分冗长的公式、以备他人阅读方便所需的辅助性数学工具、重复性的数据图表、论文使用的符号意义、单位缩写、程序全文及有关说明等。

3.毕业论文要求外文文献,外文文献需要全文翻译吗

这个不用全部翻译的，只要选择自己需要的内容翻译。

翻译的外文文献可以是一篇，也可以是两篇，但英文字符要求不少于2万。选定外文文献后先给指导老师看，得到老师的确认通过后方可翻译。

翻译的外文文献应主要选自学术期刊、学术会议的文章、有关著作及其他相关材料，应与毕业论文（设计）主题相关，并在中文译文首页用“脚注”形式注明原文作者及出处，外文原文后应附中文译文。

扩展资料：

外文翻译需要注意的问题

1、外文文献的出处不要翻译成中文，且写在中文译文的右上角（不是放在页眉处）；会议要求：名称、地点、年份、卷（期），等。

2、作者姓名以及作者的工作单位也不用必须翻译。

3、abstract翻译成“摘要”，不要翻译成“文章摘要”等其他词语。

4、Key words翻译成“关键词” 。

5、introduction 翻译成“引言”（不是导言）。

6、注意排版格式，都是单排版，行距1.25，字号小4号，等（按照格式要求）。

7、各节的标号I、II等可以直接使用，不要再翻译成“第一部分”“第二部分”，等。

8、里面的图可以拷贝粘贴，但要将图标、横纵指标的英文标注翻译成中文。

9、里面的公式、表不可以拷贝粘贴，要自己重新录入、重新画表格。

参考资料：百度百科-毕业论文

4.毕业论文外文资料

外文资料可以到外文数据库找，如：ELSEVIER数据库等检索技巧：选择与检索主题密切相关的检索词；包含常用词及专业词汇；如：kidney disease OR renal failure；包括同义词和缩写形式；如：mri OR magnetic resonance imaging；避免使用过于宽泛的词汇：如：influence；使用单词的单数形式；使用单数单词将可以检索到大多数单词单数、复数和所有格如：city---city,cities,city's,cities'一般这一规则对不规则单词可能不适用；优先顺序 OR AND AND NOT 例：genes OR chromosomes W/5 splicing OR cloning (genes OR chromosomes W/5 splicing) OR cloning 运用临近符进行作者检索例： raymond W/3 smith 可检索到Raymond Smith, Raymond J. Smith and Raymond J。

5.600分求毕业论文中的外文翻译,要有外文原文和译文

Shallow view college students（浅析大学生消费观） In the current consumption market, as a special group is receiving more and more attention. Cell phones, Internet, sports, tourism, av equipment are students of consumption. Their younger age, different from other social consumer groups of consumer psychology and behavior. On one hand has strong consumption demand, on the other hand, has obtained the financial independence. Consumer spending power of advanced concepts, the lag and has great influence on them. With this curious, we investigated the students listened, currently the teachers.Results showed that the following reasons for college students have a profound influence on the view.First, family environment for students of consumption "congenital". Family is the basic factors restricting their consumption. Most students from rural areas currently. Rural students would not spend a lot of money to buy a bar of chocolate, biscuit, candy and snacks. A classmate of institute of grammar, told reporters he every month in the consumption of food and supplies, and a small part of life. However, the students from the developed city, in the free allowance is master circumstance, even the remaining money to spend on hair, clothing, accessories, and other items. MP3 Second, the consumption of college campus environment. According to the understanding of the ", just past 11 golden weeks, "some travel agency" lovers swims "travel group, a lot of students. Some boys to girls, the pursuit of cosmetics, snacks, flowers as "sociology". In the investigation and discussion, we found that the students love more than 100 - month about spending at least 200 yuan, also has 50 yuan, the highest reach 500 yuan. One of the students of agronomy humorously tells a reporter, dating from the average expenses for the situation had been broken and three kinds, namely, man should take all NanNvFang share and the initiative of all, girls love spending even more than the situation.Internet addiction among is one where money. Some students spend all day in the net cafe, wasting their time and energy, and parents hard-earned money.Third, social environment influence on college students' view. In the interview process, a eppo school students told reporters: "some students fashion and famous, too." compare existing In the seminar, some students, in order to have a phone or a paragraph on the most popular, some classmates to economize, even sacrifice other necessary expenses. Some male classmate to buy a pair of shoes, the female classmate brand in order to buy a set of famous cosmetic or a brand-name clothes at hand to his family, money or borrow money from their classmates, these reflects some students don't know into, and driven them form the vanity of endless themselves. In addition, the male classmate hair, earrings, female students, also make positive modelling teachers and parents worried.College students are the pillars of the construction of the future society, its consumption ideas and directly affected the life character and the influence of the motherland, indirect jiangshan justice. Good training and strengthening consumer habits will get to the school, good shape, and formed the role of school student wind virtuous circle. Therefore, the schools should set students' good consumption psychology and behavior of the cultivation of campus culture construction as an important component. Facing the current as of inviting advertising the snowflake fly to the university campus, teachers and parents have necessary guidance from the side with the correct method, students correct view firmly. College students from his actual consumption of the economic situation, develop simple life style, develop good consumption habits and consumption mentality. 在当前的消费市场中，大学生作为一个特殊的消费群体正受到越来越多的关注。

手机、旅游、上网、运动、影音器材都是大学生的消费热点。他们年龄较轻，有着不同于社会其他消费群体的消费心理和行为。

一方面有着旺盛的消费需求，另一方面，尚未获得经济上的独立。消费观念的超前和消费实力的滞后，都对他们有很大影响。

带着这样的好奇，我们调查了农大的同学，听取了老师们的意见。调查结果显示，下面几种原因对大学生的消费观有着深刻的影响。

第一，家庭环境对大学生的消费观产生“先天性”的影响。家庭条件是大学生消费的根本制约因素。

农大学生大部分来自于农村。农村来的学生不愿花费很多钱去买巧克力、饼干、糖果之类的零食。

文法学院的一位同学告诉记者，他每个月的消费大部分用在伙食及学习用品上，还有一小部分是生活用品。但是，来自发达城市的学生，。

6.毕业论文外文文献翻译

去百度文库，查看完整内容> 内容来自用户：秦园园毕业设计说明书英文文献及中文翻译班级：学号：姓名：学院：软件学院专业：指导教师：2014年6月英文文献出自《IBM System Journal,2006,44(2):33-37》作者：Malcolm DavisStruts——An Open-source MVC ImplementationThis article introduces Struts, a Model-View-Controller implementation that uses servlets and JavaServer Pages (JSP) technology. Struts can help you control change in your Web project and promote specialization. Even if you never implement a system with Struts, you may get some ideas for your future servlets and JSP page in grade school put HTML pages on the Internet. However, there is a monumental difference between a grade school page and a professionally developed Web site. The page designer (or HTML developer) must understand colors, the customer, product flow, page layout, browser compatibility, image creation, JavaScript, and more. Putting a great looking site together takes a lot of work, and most Java developers are more interested in creating a great looking object interface than a user interface. JavaServer Pages (JSP) technology provides the glue between the page designer and the Java developer.If you have work。

7.毕业设计外文翻译

Introduction to Civil Engineering Papers Civil Engineering for the development of a key role, first as a material foundation for the civil engineering construction materials, followed by the subsequent development of the design theory and construction technology. Every time a new quality of building materials, civil engineering will be a leap-style development.People can only rely on the early earth, wood and other natural materials in the construction activities, and later appeared in brick and tile that artificial materials, so that the first human to break the shackles of natural building materials. China in the eleventh century BC in the early Western Zhou Dynasty created the tile. The first brick in the fifth century BC to the third century BC, when the tomb of the Warring States Period. Brick and tile better than the mechanical properties of soil, materials, and easy to manufacture.The brick and tile so that people began to appear widely, to a large number of housing construction and urban flood control project, and so on. This civil engineering technology has been rapid development. Up to 18 to the 19th century, as long as two thousand years, brick and tile has been a major civil engineering construction materials, human civilization has made a great contribution to the even was also widely used in the present.The application of a large number of steel products is the second leap in civil engineering. Seventeen 1970s the use of pig iron, the early nineteenth century, the use of wrought iron bridges and the construction of housing, which is a prelude to the emergence of steel.From the beginning of the mid-nineteenth century, metallurgical industry, smelting and rolling out high tensile and compressive strength, ductility, uniformity of the quality of construction steel and then produce high-strength steel wire, steel cables. As a result of the need to adapt to the development of the steel structure have been flourishing. In addition to the application of the original beam, arch structure, the new truss, a framework, the structure of network, cable structures to promote the gradual emergence of the structure of Yan in the form of flowers.From the brick building long-span structures, stone structures, a few meters of wood, steel structure to the development of tens of meters, a few hundred meters, until modern km above. So in the river, cross the bridge from shelves, on the ground since the construction of skyscrapers and high-rise tower, even in the laying of underground railway, to create an unprecedented miracle.In order to meet the needs of the development of steel works, on the basis of Newton's mechanics, material mechanics, structural mechanics, structural engineering design theory came into being, and so on. Construction machinery, construction technology and construction organization design theory also development, civil engineering from the experience of rising to become science, engineering practice and theoretical basis for both is a different place, which led to more rapid development of civil engineering.During the nineteenth century, 20, made of Portland cement, concrete has come out. Concrete can aggregate materials, easy-to-concrete structures forming, but the tensile strength of concrete is very small, limited use. By the middle of the nineteenth century, the surge in steel production, with the emergence of this new type of reinforced concrete composite construction materials, which bear the tension steel, concrete bear the pressure and play their own advantages. Since the beginning of the 20th century, reinforced concrete is widely used in various fields of civil engineering.From the beginning of the 1930s, there have been pre-stressed concrete. Pre-stressed concrete structure of the crack resistance, rigidity and carrying capacity, much higher than the reinforced concrete structure, which uses an even wider area. Civil Engineering into the reinforced concrete and prestressed concrete dominant historical period. Concrete buildings to bring about the emergence of new economic, aesthetic structure in the form of engineering, civil engineering so that a new construction technology and engineering design of the structure of the theory. This is another leap in the development of civil engineering.A project to build the facilities in general to go through the investigation, design and construction in three stages, require the use of geological prospecting projects, hydro-geological survey, engineering survey, soil mechanics, mechanical engineering, engineering design, building materials, construction equipment, engineering machinery, building the economy , And other disciplines and 。

毕业设计论文外文

1.求毕业论文英文摘要

The new economic era, known as the corporate image of the human, material and financial resources beyond the "fourth resource", the competition among the enterprises of products from the local competition, price competition, resource competition, competition for talent, technology to the development of competition The integrity of corporate competition, that is, the image of competition. Create good corporate image, not only a modern market economy is an inevitable trend of development, but also enterprises face the increasingly fierce market competition and the success of winning a major magic weapon. For large enterprises, corporate image planning has been relatively mature. While many small and medium enterprises because the road taken the low-cost, how cost-competitive promotion to the quality of competition, and even brand competition, or unable, based on this understanding of SMEs, from corporate image recognition system in the concept of identification system Behavior recognition system, visual recognition systems of the three constituent elements of perspective, the current image of the planning for SMEs on the existence of several major problems, propose solutions to the measures, so that small and medium enterprises based on domestic and international trend of a number of simple Discussion.。

2.毕业论文英文摘要翻译

[abstract] This is Changsha YuanGe residential area design，【construction's long, wide】，（不知道是你写的不全还是怎么，有点不通，如果你要加数字，就用the length of construction is。the width of construction is。） a total of 12 layer, total building area is。, building height of principal part is。. Design content mainly includes the architectural design and structural design .

The part of architectural design Including the overall layout,the plane and vertical transportation, and the requirements of fire prevention and evacuation. Design mainly include

planar configuration, elevation and profile design and fire protection and evacuation design, etc., follow the principle of "safty,availability,economy,aesthetics" , satisfy people's demand for residential use function and aesthetic.

Design structure using short-leg

shear wall system, to adapt to the new housing concept of people. Combining with hand calculation and PKPM computing , including load calculation (gravity load, wind load),shear walls and floor slabs, the design calculation of beam and reinforcement.

Key words: short-leg shear wall; High-rise residential; The structure design

本人CET-6水平，纯手工翻译，除查询专业单词外，绝没使用软件，耗时20分钟，还望采纳。希望你论文获得成功。

3.毕业论文中的外文文献翻译,有什么要求

原发布者：ww83428601

毕业论文外文文献翻译要求一、翻译的外文文献可以是一篇，也可以是两篇，但英文字符要求不少于2万二、翻译的外文文献应主要选自学术期刊、学术会议的文章、有关著作及其他相关材料，应与毕业论文（设计）主题相关，并在中文译文首页用“脚注”形式注明原文作者及出处，外文原文后应附中文译文。三、中文译文的基本撰写格式为：1.题目：采用三号、黑体字、居中打印；2.正文：采用小四号、宋体字，行间距一般为固定值20磅，标准字符间距。页边距为左3cm，右2.5cm，上下各2.5cm，页面统一采用A4纸。四、英文的基本撰写格式为：1.题目：采用三号、TimesNewRoman字、加黑、居中打印2.正文：采用小四号、TimesNewRoman字。行间距一般为固定值20磅，标准字符间距。页边距为左3cm，右2.5cm，上下各2.5cm，页面统一采用A4纸.3.脚注：五号，TimesNewRoman，顺序为作者.题目.出处，五、封面格式由学校统一制作（注：封面上的“翻译题目”指中文译文的题目，封面中文小四号宋体，英文小四号TimesNewRoman），六、装订：左侧均匀装订，上下共两个钉，并按“封面、外文原文、译文”的顺序统一装订。七、忌自行更改表格样式大连工业大学艺术与信息工程学院毕业设计（论文）外文文献外文题目翻译题目系别专业班级学生姓名指导教师大连工业大学艺术与信息工程学院毕业设计（论文）开题报告题目名称系别专业班级学生姓名指导教师开题报告日期年月

4.毕业论文要求外文文献,外文文献需要全文翻译吗

这个不用全部翻译的，只要选择自己需要的内容翻译。

翻译的外文文献可以是一篇，也可以是两篇，但英文字符要求不少于2万。选定外文文献后先给指导老师看，得到老师的确认通过后方可翻译。

翻译的外文文献应主要选自学术期刊、学术会议的文章、有关著作及其他相关材料，应与毕业论文（设计）主题相关，并在中文译文首页用“脚注”形式注明原文作者及出处，外文原文后应附中文译文。扩展资料：外文翻译需要注意的问题 1、外文文献的出处不要翻译成中文，且写在中文译文的右上角（不是放在页眉处）；会议要求：名称、地点、年份、卷（期），等。

2、作者姓名以及作者的工作单位也不用必须翻译。 3、abstract翻译成“摘要”，不要翻译成“文章摘要”等其他词语。

4、Key words翻译成“关键词” 。 5、introduction 翻译成“引言”（不是导言）。

6、注意排版格式，都是单排版，行距1.25，字号小4号，等（按照格式要求）。 7、各节的标号I、II等可以直接使用，不要再翻译成“第一部分”“第二部分”，等。

8、里面的图可以拷贝粘贴，但要将图标、横纵指标的英文标注翻译成中文。 9、里面的公式、表不可以拷贝粘贴，要自己重新录入、重新画表格。

参考资料：百度百科-毕业论文。

5.英文翻译毕业论文摘要

Abstract: in recent years, China's gross domestic economy has been growing in a steady speed, and its market competition has been increasingly intensifying. As a result, internal control has become a significant component of companies' survival in the future and the key to their continuing development. A robust internal control system has to be both theoretically sound and practically viable. Therefore, using the five elements of the internal control framework as the theoretical basis, combined with the actual needs of the enterprises in operation management, this thesis deigns the internal control on the four economic operation cycles in monetary capital, procurement and payment, sales and payment collection, and costs. At the end of the paper, the thesis analyses existing issues within the internal control schemes in our country, and provides insights and suggestions on the following three aspects: improving the structure of internal control, strengthening the budgetary management and fully utilizing the internal audit function.

Keywords: internal control, monetary capital, procurement and payment. Sales and payment collection, costs, Internal audit

内部控制是micro-management的意思吗？internal control有点拗口，建议用internal management

6.求毕业论文的英文摘要

The filling pile department is refers to, in the project scene through the mechanical drill hole, the steel pipe pushes methods and so on earth or manpower excavation forms the pile hole in the foundation soil, and lays aside the pile which in among them the reinforcing cage, the irrigation concretes make, according to becomes the hole method to be different, the filling pile may divide into the settling tube filling pile, the drill hole filling pile and digs the hole filling pile and so on several kinds.Drills a hole the filling pile is according to becomes one kind of pile which the pile method classification defines. The filling pile earliest more than 100 year ago in 1893, because of the industry development as well as the population growth, the high-rise construction increased unceasingly, but because many city's ground conditions were quite bad, could not withstand the pressure which directly transmitted by the high-rise construction, the surface following has the thickness very big soft soil or the medium intensity clay level, the construction high-rise construction like still continued to use the friction pile which at that time used in common, had the very big subsidence inevitably. Therefore engineers used for reference have dug a well the technical invention to dig in the hole to construct the reinforced concrete artificially to become the pile. Therefore afterward 50 years later, namely developed in the early-1940s along with the high efficiency drill hole machines and tools first is published successfully in the US, after World War II, the world was specially the European and American developed country economic resurgence and the development, at this point, changes with each new day along with the science and technology the development, drilled a hole the filling pile in high-level, in the ultrahigh layer building and the heavy construction is widely applied. Certainly, in our country, drilled a hole the filling pile design and the construction level also obtained the considerable development.。